Industriekoffer

Available in well over 40 configurations, the 3I Series of waterproof cases are the perfect solution for storing and transporting your delicate electronics, A/V equipment, computers, cables, microphones, mixers and all other things that need thorough protection from dust, water and impact damage.

SKB 3I Series Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasketed, water and dust tight, submersible design (MIL-C-4150J) that is resistant to corrosion and impact damage. Features a molded-in hinge, patented "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD-648C), resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD-810F).

1. Cubed foam for customization
2. Four in-line skate style wheels for easy transport
3. TSA accepted key locking latches are available
4. Padlock holes include stainless steel padlock protector clips
5. Waterproof and dust tight design (MIL-C-4150J)
6. Molded-in hinge for added protection
7. Trigger release latch system
8. Snap-down rubber over-molded cushion grip handle
9. Ambient pressure equalization valve (MIL-STD-648C)
10. Resistant to UV, solvents, corrosion, fungus (MIL-STD-810F)
11. Resistant to impact damage (MIL-STD-810F)

​Dimensions:
Inner (LxWxH in mm): 781x660x394mm
Outer (LxWxH in mm): 856x725x416mm
Weight: 18,2 kg

Available in well over 40 configurations, the 3I Series of waterproof cases are the perfect solution for storing and transporting your delicate electronics, A/V equipment, computers, cables, microphones, mixers and all other things that need thorough protection from dust, water and impact damage.

The 3I-3026-15 Pro Audio Utility Case measures an impressive 30" Long x 26" Wide x 15" Deep, is molded of ultra high-strength polypropylene copolymer resin, and features a gasketed, water and dust tight, submersible design (IP67) that is resistant to corrosion and impact damage, and an automatic ambient pressure equalization valve (MIL-STD-648C) to assist with moisture control.

This iSeries size is another new size that is being produced on SKB's Energy Saving Hydraulic Toggle Injection Molding System at SKB's manufacturing facility in Orange, California. This injection system is one of the largest and most efficient injection molding systems in the United States.

The 3I-3026-15B Pro Audio Utility Case also features three protected hinges with stainless steel pins to provide lid stability, SKB's 'trigger release latch system can be retrofitted with TSA recognized and accepted locks, an oversized double grip carrying handle to balance a heavy load, and comfortable Oversized snap-down rubber over-molded cushion grip handles on each end for a two person carry or transport. The heavy-duty oversized handle and wide set double wheels offer the perfect solution to comfortable transport of pro audio equipment, cables, hardware, drums or drum accessories.

1. Oversized heavy-duty handles and wide-set double wheels
2. Ultra high-strength polypropylene copolymer resin
3. UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
4. Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
5. Automatic ambient pressure equalization value (MIL-STD-648C & IP67)
6. Resistant to corrosion and impact damage
7. Molded-in hinges
8. Patented "trigger release" TSA Locking Latch system
9. TSA recognized and accepted locks can be retrofitted
10. Stainless steel locking loops for customer supplied lock

​Dimensions:
Inner (LxWxH in mm): 781x660x394mm
Outer (LxWxH in mm): 856x725x416mm
Weight: 14,7 kg

The 3I-3424-12 Pro Audio Utility Case measures an impressive 34" Long x 24" Wide x 12" Deep, is molded of ultra high-strength polypropylene copolymer resin, and features a gasketed, water and dust tight, submersible design (IP67) that is resistant to corrosion and impact damage, and an automatic ambient pressure equalization valve (MIL-STD-648C) to assist with moisture control.

This iSeries size is another new size that is being produced on SKB's Energy Saving Hydraulic Toggle Injection Molding System at SKB's manufacturing facility in Orange, California. This injection system is one of the largest and most efficient injection molding systems in the United States.

The 3I-3424-12 Pro Audio Utility Case with a cubed foam interior also features three protected hinges with stainless steel pins to provide lid stability, SKB's 'trigger release latch system can be retrofitted with TSA recognized and accepted locks, an oversized double grip carrying handle to balance a heavy load, and comfortable Oversized snap-down rubber over-molded cushion grip handles on each end for a two person carry or transport. The heavy-duty oversized handle and wide set double wheels offer the perfect solution to comfortable transport of pro audio equipment, cables, hardware, drums or drum accessories.

1. Oversized heavy-duty handles and wide-set double wheels
2. Ultra high-strength polypropylene copolymer resin
3. UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
4. Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
5. Automatic ambient pressure equalization value (MIL-STD-648C & IP67)
6. Resistant to corrosion and impact damage
7. Molded-in hinges
8. Patented "trigger release" TSA Locking Latch system
9. TSA recognized and accepted locks can be retrofitted
10. Stainless steel locking loops for customer supplied lock

​Dimensions:
Inner (LxWxH in mm): 876x622x324mm
Outer (LxWxH in mm): 951x686x346mm
Weight: 17,9 kg

The 3i-3424-12 Utility Case measures an impressive interior dimension of 34,5"x24,5"x12,75" is molded of ultra high-strength polypropylene copolymer resin and features a gasketed, water and dust tight, submersible design (IP67) that is resistant to corrosion and impact damage, and an automatic ambient pressure equalization valve (MIL-STD-648C) to assist with moisture control.

This iSeries size is another new size that is being produced on SKB's Energy Saving Hydraulic Toggle Injection Molding System at SKB's manufacturing facility in Orange, California. This injection system is one of the largest and most efficient injection molding systems in the United States.

The 3I-3424-12 Utility Case also features three protected hinges with stainless steel pins to provide lid stability, SKB's trigger release latch system can be retrofitted with TSA recognized and accepted locks, an oversized double grip carrying handle to balance a heavy load, and comfortable Oversized snap-down rubber over-molded cushion grip handles on each end for a two person carry or transport. The heavy-duty oversized handle and wide set double wheels offer the perfect solution to comfortable transport of pro audio equipment, cables, hardware, drums or drum accessories.

​1. Oversized heavy-duty handles and wide-set double wheels
2. Ultra high-strength polypropylene copolymer resin
3. UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
4. Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
5. Automatic ambient pressure equalization value (MIL-STD-648C & IP67)
6. Resistant to corrosion and impact damage
7. Molded-in hinges
8. Patented "trigger release" TSA Locking Latch system
9. TSA recognized and accepted locks can be retrofitted
10. Stainless steel locking loops for customer supplied lock

​Dimensions:
Inner (LxWxH in mm): 876x622x324mm
Outer (LxWxH in mm): 951x686x346mm
Weight: 13,8 kg

SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, and feature a gasket sealed, water and dust tight, submersible design (MIL-C-4150J) that is resistant to corrosion and impact damage. Standard features also include a molded-in hinge, patented trigger release latch system, comfortable, snap-down rubber over-molded cushion grip handles, automatic ambient pressure equalization valve (MIL-STD-648C), and resistance to UV, solvents, and fungus (MIL-STD-810F).

1. Industrial strength injection molded case
2. Four wide set in-line skate style wheels and tow handle for easy transport
3. TSA accepted key locking latches are available
4. Padlock holes include stainless steel padlock protector clips
5. Waterproof and dust tight design (MIL-C-4150J)
6. Molded-in hinge for added protection
7. Trigger release latch system
8. Snap-down rubber over-molded cushion grip handle
9. Ambient pressure equalization valve (MIL-STD-648C)
10. Resistant to UV, solvents, corrosion, fungus (MIL-STD-810F)
11. Resistant to impact damage (MIL-STD-810F)

​Dimensions:
Inner (LxWxH in mm): 914x343x305mm
Outer (LxWxH in mm): 982x408x326mm
Weight: 9,2 kg

Features layers of foam for customer customization and padlock holes with stainless steel protector clips for added strength. SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, and feature a gasket sealed, water and dust tight, submersible design (MIL-C-4150J) that is resistant to corrosion and impact damage. Standard features also include a molded-in hinge, patented trigger release latch system, comfortable, snap-down rubber over-molded cushion grip handles, automatic ambient pressure equalization valve (MIL-STD-648C), and resistance to UV, solvents, and fungus (MIL-STD-810F).

1. Industrial strength injection molded case
2. Layered foam for customer customization
3. Four wide set in-line skate style wheels and tow handle for easy transport
4. TSA accepted key locking latches are available
5. Padlock holes include stainless steel padlock protector clips
6. Waterproof and dust tight design (MIL-C-4150J)
7. Molded-in hinge for added protection
8. Trigger release latch system
9. Snap-down rubber over-molded cushion grip handle
10. Ambient pressure equalization valve (MIL-STD-648C)
11. Resistant to UV, solvents, corrosion, fungus (MIL-STD-810F)
12. Resistant to impact damage (MIL-STD-810F)

​Dimensions:
Inner (LxWxH in mm): 914x343x305mm
Outer (LxWxH in mm): 982x408x326mm
Weight: 11 kg

Available in well over 40 configurations, the 3I Series of waterproof cases are the perfect solution for storing and transporting your delicate electronics, A/V equipment, computers, cables, microphones, mixers and all other things that need thorough protection from dust, water and impact damage.

SKB 3I Series Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasketed, water and dust tight, submersible design (MIL-C-4150J) that is resistant to corrosion and impact damage. Features a molded-in hinge, patented "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD-648C), resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD-810F).

1. In-line skate style wheels for easy transport.
2. Trigger release latches can be retrofitted with TSA accepted key locking latches.
3. Padlock holes include stainless steel padlock protector clips
4. Cushion grip handles on three sides
5. Waterproof and dust tight design (MIL-C-4150J)
6. Molded-in hinge for added protection
7. Trigger release latch system
8. Snap-down rubber over-molded cushion grip handle
9. Ambient pressure equalization valve (MIL-STD-648C)
10. Resistant to UV, solvents, corrosion, fungus (MIL-STD-810F)
11. Resistant to impact damage (MIL-STD-810F)

​Dimensions:
Inner (LxWxH in mm): 927x368x152mm
Outer (LxWxH in mm): 992x427x174mm
Weight: 6,9 kg